5thWheelForums.com - View Single Post

Motor31 · 02-13-2009, 09:31 AM

We've been double towing for a little over a year now. I used a fabricator / welder in Tucson. Make sure there is plenty of "tongue" behind the trailer to allow the toad to clear the trailer, especially the ladder side. I did have to buy an extender for the hitch that moved the toad back a few inches.

Depending on what you have as a toad you may also need to set up a brake system for it.

02-13-2009, 09:31 AM	#6
Motor31 Senior Member Join Date: May 2005 Posts: 2,130	We've been double towing for a little over a year now. I used a fabricator / welder in Tucson. Make sure there is plenty of "tongue" behind the trailer to allow the toad to clear the trailer, especially the ladder side. I did have to buy an extender for the hitch that moved the toad back a few inches. Depending on what you have as a toad you may also need to set up a brake system for it. __________________ Mike Nancy and the fuzzies Fulltiming since June 2004 Volvo 660 MH tow vehicle 2005 MS 38RL 2007 Saturn Ion "toad" 2010 Gold Wing "piggyback"