View Full Version : rubber roof lifting
gordonpoole
11-23-2009, 10:03 PM
I just checked my roof before leaving on our snowbird trip and discovered a bubble in the rubber near the front. It's about 16" long and 6" wide. It sticks up about an inch. How do I fix it?
Stripit
11-24-2009, 09:07 AM
I have heard that you can repair by injecting glue with a needle. I have seen if you cut a slit and actually open up the bubble, you then can reglue the decking and lay the loose top back down. Your going to have a overlap of the material. The one I saw was trimmed to make it look like all the excess material was removed and all that was visible was a glue line. It actually did not look bad and was glued enough to prevent any leaks.
LindaH
11-24-2009, 10:10 AM
You could also cover the seam with Eternabond once you've glued the sections down.
Motor31
11-25-2009, 09:50 AM
I second and third the use of Eternabond tape for roof repairs. Add another barrier for the water to face to help prevent leaks.
vBulletin® v3.8.8 Beta 4, Copyright ©2000-2024, vBulletin Solutions, Inc.